Plus de 10 Magasins

dans toute la France...

Trouver un magasin
Retour à la liste

Plus de vues

- 34 %

Prix public : 906,00 €

Prix Terre de Son : 599,00 €

ou 4 X 149,75 €

En stock
Stock internet

Crown

XTI1002

Crown
Besoin d’information supplémentaire ?
contactez nous

Note client

Frais de Port Offert
Payez en 3 ou 4 X sans frais

DESCRIPTION DU PRODUIT GARANTIE
Amplificateur 2 x 500W/4 ohms. Cette nouvelle génération intègre de nombreuses améliorations au niveau de ses performances, moyens de configuration, ainsi que des traitements DSP intégrés.

Les amplificateurs de la Série XTI 2 sont dédiés à la sonorisation professionnelle mobile de forte puissance. Leur face avant intègre un afficheur LCD permettant la sélection de programmes d'usine de configuration d'enceintes et de réglage de différents paramètres : filtrage actif, délai, limiteur, etc....

Cette nouvelle génération intègre de nombreuses améliorations au niveau de ses performances, moyens de configuration, ainsi que des traitements DSP intégrés :



Correction d'entrée : 6 filtres paramétriques par canal avec efficacité variable et gain de
± 15 dB. 2 filtres plateaux, grave et aigu.
Filtrage actif : filtres passe-haut et passe-bas par canal.
Filtre Butterworth 6/12/18/24 dB par octave.
Filtre Linkwitz-Riley 24/48 dB par octave avec contrôle de gain ± 15 dB et de polarité.
Correction en sortie : 8 filtres paramétriques par canal avec efficacité variable et gain de ± 15 dB.
Délai d'alignement : 50 ms (total).
Synthétiseur de sub-harmoniques : mixage du signal de sortie avec une partie du signal d'entrée transposé d'une octave vers le bas.
Contrôle de fréquence, de gain et type de filtrage.
Limitation PeakTM Plus : limiteur avec réglage par l'utilisateur du seuil, du temps d'attaque et de retour.
Ventilation contrôlée par trois mode utilisateur : normal, continu et plein régime.
Nouvelles options de contrôle par logiciel permettant le contrôle des lignes 100V et de la température de l'alimentation.
Poignées de transport en aluminium intégrées au châssis.
Embase secteur avec clip de verrouillage.
Logiciel de contrôle HiQnet Band ManagerTM et System ArchitectTM.
50 presets de réglage dont 49 modifiables par l'utilisateur.
Poids : 8,4 Kg
Garantie fabricant 3 ans.

PUISSANCE XTi 1002 :

2 x 275W / 8 Ohms
2 x 500W / 4 ohms
2 x 700W / 2 Ohms
1 x 1000W / 8 Ohms bridgé
1 x 1400W / 4 Ohms bridgé

XTI1002 CROWN:

Input EQ
6 parametric filters per channel with adjustable Q, ±15 dB boost/cut. Also adjustable high and low shelving filters. This 8-filter EQ section can be bypassed.

Crossover Filters
Highpass and Lowpass per channel. Butterworth 6/12/18/24 dB per octave. Linkwitz-Riley 24/48 dB per Octave. Also includes ± 15 dB bandpass gain and polarity control.

Output EQ
8 parametric filters per channel with adjustable Q, ±15 dB boost/cut. This 8-filter EQ section can be bypassed.

Delay
For signal alignment of driver; 50 mS of total delay.

SubHarmonic Synth
Takes the low-frequency content of the input signal and "synthesizes" a new signal that is the same as the input signal but one octave lower. The new synthesized signal is then mixed with the original signal to create the effect. New: Users now have control over frequency, gain, and filter type.

Peakx™ Plus Limiter
User defeatable limiter that allows users to control Threshold, Attack, and Release times.

Presets
50 total presets, 49 of which are user-definable.






Sensitivity (for full rated power at 4 ohms)

1.4 Vrms

Frequency Response (at 1 watt, 20 Hz - 20 kHz)
+0 dB, –1 dB

Signal-to-Noise Ratio (below rated 1kHz power at 8 ohms)
XTi1002/2002/4002: 100 dB (A weighted)
XTi6002: 103 dB (A weighted)

Total Harmonic Distortion (THD)
< 0.5%

Damping Factor 20 Hz to 1 kHz
> 500

Crosstalk (below rated power)
20 kHz - 1 kHz: > 70 db

Input Impedance (nominal)
20k ohms balanced, 10k ohms unbalanced

Maximum Input Signal
+22 dBu typical

AC Line Voltage and Frequency Configurations
100 VAC, 120 VAC, 220-240 VAC 50/60 Hz

AC Line Current
(120 VAC amplifier playing 1/8 power pink noise into 4 ohms per ch)
XTi1002: 6.8A; no more than 38W at idle
XTi2002: 8.3A; no more than 38W at idle
XTi4002: 10.5A; no more than 38W at idle
XTi6002: 15.3A; no more than 180W at idle

Operating Temperature
0°C to 40°C at 95% relative humidity (non-condensing)






Level
Two front-panel rotary level controls, one for each channel

Power Switch
On/Off switch applies AC power to the amplifier

Sel/Prev/Next Buttons
Three buttons near the LCD screen that are used to access menu items and front panel lockout

LCD Screen
Backlit liquid crystal display that shows preset and processing status






Signal Indicator
Green LED, one per channel, illuminates when a very low-level signal is present at input (may be used for troubleshooting cable runs).

–10 Indicator
Green LED flashes when output signal exceeds -10 dB below clip.

–20 Indicator
Green LED flashes when output signal level exceeds -20 dB below clip.

Ready Indicator
Green LED, one per channel, illuminates when the amplifier is ready to produce audio.

Clip Indicator
Red LED, one per channel, turns on at the threshold of audible distortion

Temp Indicator
Red LED, one per channel, illuminates under excessive temperature conditions

Power Indicator
Blue LED illuminates when the amplifier has been turned on and has power






Input Connectors
XLR, one per channel

Link/Out Connector
Loop-thru signal from input connector for linking another amplifier, one per channel.

Output Connectors
Two Neutrik® Speakon® NL4MP output connectors. Channel-1 Speakon® is wired with Ch. 1 and Ch. 2 outputs for use with optional single 4-conductor cable. Two binding post outputs (in parallel with Speakon® connectors).

HiQnet™ USB Connector
Type B, connects to HiQnet™ network.






Chassis
Steel

Front Panel
Cast-aluminum

Cooling
Proportional speed fan with front-to-rear airflow.

Dimensions
XTi 1002/2002/4002: 19" (W) x 3.5" (H) x 12.25" (D)
XTi 6002: 19" (W) x 3.5" (H) x 16.2" (D)

Net Weight
XTi 1002/2002/4002: 18.5 lbs (8.4kg)
XTi 6002: 24.0 lbs (10.9kg)

Shipping Weight
XTi 1002/2002/4002: 21.5 lbs (9.8kg)
XTi 6002: 30.0 lbs (13.6kg)
Garantie étendue à 6 ans pour tout achat dès 2022.

 PRODUITS  EQUIVALENTS

Synq
PE-900

Prix public : 590,00 €

Prix Terre de Son : 529,00 €

-10 %

ou 4 X 132,25 €

Qsc
GX3

Prix public : 577,00 €

Prix Terre de Son : 439,00 €

-24 %

ou 4 X 109,75 €

Wharfedale Pro
CPD-2600

Prix public : 610,00 €

Prix Terre de Son : 549,00 €

-10 %

ou 4 X 137,25 €

 PRODUITS  COMPLÉMENTAIRES

Gator
GR2L

Prix public : 168,00 €

Prix Terre de Son : 151,00 €

-10 %

ou 4 X 37,75 €

Gator
GR4L

Prix public : 188,00 €

Prix Terre de Son : 169,00 €

-10 %

ou 4 X 42,25 €

Audiophony
CS-21/20

Prix public : 49,00 €

Prix Terre de Son : 45,00 €

-8 %
Résultats se rapprochant de votre recherche